Author: admin

While Nemo Mobile OS doesn’t ship with udisks2 nor with the GLib/GIO GVfs2 modules that interact with it, we still wanted removable volume management working with the file indexer.

It means that types like GVolume and GVolumeMonitor in GLib’s GIO will fall back to GUnixVolume and GUnixVolumeMonitor using GUnixMount and GUnixMounts instead of using the more competent GVfs2 modules.

The GUnixMounts fallback uses the _PATH_MNTTAB, which generally points to /proc/mounts, to know what the mount points are.

Removable volumes usually aren’t configured in the /etc/fstab file, which would or could affect /proc/mounts, plus if you’d do it this way the UUID label can’t be known upfront (you don’t know which sdcard the user will insert). Tracker’s FS miner needs this label to uniquely identify a removable volume to know if a previously seen volume is returning.

If you look at gunixvolume.c’s g_unix_volume_get_identifier you’ll notice that it always returns NULL in case the UUID label isn’t set in the mtab file: the pure-Unix fall back implementations aren’t fit for non-typical desktop usage; it’s what udisks2 and GVfs2 normally provide for you. But we don’t have it on the Nemo Mobile OS.

The mount_add in miners/fs/tracker-storage.c luckily has an alternative that uses the mountpoint’s name (line ~592). We’ll use this facility to compensate for the lacking UUID.

Basically, we add the UUID of the device to the mountpoint’s directory name and Tracker’s existing volume management will generate a unique UUID using MD5 for each unique mountpoint directory. What follows is specific for Nemo Mobile and its systemd setup.

We added some udev rules to /etc/udev/rules.d/90-mount-sd.rules:

SUBSYSTEM=="block", KERNEL=="mmcblk1*", ACTION=="add", MODE="0660", TAG+="systemd", 
  ENV{SYSTEMD_WANTS}="mount-sd@%k.service", ENV{SYSTEMD_USER_WANTS}="tracker-miner-fs.service
  tracker-store.service"

We added /etc/systemd/system/mount-sd@.service:

[Unit]
Description=Handle sdcard
After=init-done.service dev-%i.device
BindsTo=dev-%i.device

[Service]
Type=oneshot
RemainAfterExit=yes
ExecStart=/usr/sbin/mount-sd.sh add %i
ExecStop=/usr/sbin/mount-sd.sh remove %i

And we created mount-sd.sh:

if [ "$ACTION" = "add" ]; then
    eval "$(/sbin/blkid -c /dev/null -o export /dev/$2)"
    test -d $MNT/${UUID} || mkdir -p $MNT/${UUID}
    chown $DEF_UID:$DEF_GID $MNT $MNT/${UUID}
    touch $MNT/${UUID}
    mount ${DEVNAME} $MNT/${UUID} -o $MOUNT_OPTS || /bin/rmdir $MNT/${UUID}
    test -d $MNT/${UUID} && touch $MNT/${UUID}
else
    DIR=$(mount | grep -w ${DEVNAME} | cut -d \  -f 3)
    if [ -n "${DIR}" ] ; then
        umount $DIR || umount -l $DIR
    fi
fi

Now we just have to configure Tracker right:

gsettings set org.freedesktop.Tracker.Miner.Files index-removable-devices true

Let’s try that:

# Insert sdcard
[nemo@Jolla ~]$ mount | grep sdcard
/dev/mmcblk1 on /media/sdcard/F6D0-FC42 type vfat (rw,nosuid,nodev,noexec,...
[nemo@Jolla ~]$ 

[nemo@Jolla ~]$ touch  /media/sdcard/F6D0-FC42/test.txt
[nemo@Jolla ~]$ tracker-sparql -q "select tracker:available(?s) nfo:fileName(?s) \
     { ?s nie:url 'file:///media/sdcard/F6D0-FC42/test.txt' }"
Results:
  true, test.txt

# Take out the sdcard

[nemo@Jolla ~]$ mount | grep sdcard
[nemo@Jolla ~]$ tracker-sparql -q "select tracker:available(?s) nfo:fileName(?s) \
     { ?s nie:url 'file:///media/sdcard/F6D0-FC42/test.txt' }"
Results:
  (null), test.txt
[nemo@Jolla ~]$

I will be doing a presentation about Tracker at FOSDEM this year.

Recapping from my last blog article; I worked a bit on this concept during the weekend.

When a program is responsible for delivery of a file to the file system that program knows precisely when the rename syscall, completing the file transfer transaction, takes place.

An example of such a program is an MTP daemon. I quote from wikipedia: A main reason for using MTP rather than, for example, the USB mass-storage device class (MSC) is that the latter operates at the granularity of a mass storage device block (usually in practice, a FAT block), rather than at the logical file level.

One solution for metadata extraction for those files is to have file monitoring on the target storage directory with Tracker’s FS miner. The unfortunate thing with such a solution is that file monitoring will inevitably always trigger after the rename syscall. This means that only moments after the transfer has completed, the system can update the RDF storage. Not during and not just in time.

With this new feature I plan to allow a software like an MTP daemon to be ahead of that. For example while the file is being transferred or just in time upfront and / or just after the rename syscall depending on the use-case and how the developer plans to use the feature.

The API might still change. I plan to for example allow passing the value of tracker:available among other useful properties for which a MTP daemon might want to safely tamper with the values (edit: this is done and API in this blog article is adapted). The tracker:available property can be used to indicate to other software the availability of a file. For example while the file is being transferred you could set it to false and right after the rename you set it to true.

When you are building a device that has no other entry points for user files or documents than MTP, this feature helps you turning off Tracker’s FS miner completely. This could be ideal for certain tablets and phones.

Currently it looks like this. Branch is available here:

static void
on_finished (GObject *none, GAsyncResult *result, gpointer user_data) {
    GMainLoop *loop = user_data;
    GError *error = NULL;
    gchar *sparql = tracker_extract_get_sparql_finish (result, &error);
    if (error == NULL) {
        g_print ("%s", sparql);
        g_free (sparql);
    } else
        g_error("%s", error->message);
    g_clear_error (&error);
    g_main_loop_quit (loop);
}   

int main (int argc, char **argv) {
    const gchar *file = "/tmp/file.png";
    const gchar *dest = "file:///home/pvanhoof/Documents/Photos/photo.png"
    const gchar *graph = "urn:mygraph"
    GMainLoop *loop;
    g_type_init();
    loop = g_main_loop_new (NULL, FALSE);
    tracker_extract_get_sparql (file, dest, graph, time(0), time(0),
                                TRUE, on_finished, loop);
    g_main_loop_run (loop);
    g_object_unref (loop);
}

This will result in something like this:

INSERT SILENT { GRAPH  <urn:mygraph> {
    _:file a nfo:FileDataObject , nie:InformationElement ;
	 nfo:fileName "photo.png" ;
	 nfo:fileSize 38155 ;
	 nfo:fileLastModified "2012-12-17T09:20:18Z" ;
	 nfo:fileLastAccessed "2012-12-17T09:20:18Z" ;
	 nie:isStoredAs _:file ;
	 nie:url "file:///home/pvanhoof/Documents/Photos/photo.png" ;
	 nie:mimeType "image/png" ;
	 a nfo:FileDataObject ;
	 nie:dataSource <urn:nepomuk:datasource:9291a450-etc-etc> ;
	 tracker:available true .
    _:file a nfo:Image , nmm:Photo ;
	 nfo:width 150 ;
	 nfo:height 192 ;
	 nmm:dlnaProfile "PNG_LRG" ;
         # more extracted metadata
	 nmm:dlnaMime "image/png" .
  } }

As usual with stuff that I blog about: this feature isn’t finished, it’s not in master yet, not even reviewed. The API might change. All the usual stuff.

Tired of the fact that my N9 had few battery time I decided to “as a developer” investigate my device a little bit. Last time I did that I was still contracted by Nokia and a few days later I had to fly to Helsinki to help fix a Tracker in combination with contactsd bug. I’m btw. no longer working for Nokia since a few months. So this time I can’t fix it for everyone. Lemme write it here instead.

It’s pretty funny what is going on: I installed Battery-Icon at some point. The software is writing periodically to /usr/share/applications/battery-icon.desktop. Having been a developer at Nokia for the metadata subsystem I know that tracker-miner-fs will reindex .desktop files that change. You don’t really need to be a developer to know that: Tracker’s FS miner is, among other things, responsible for keeping up to date a list of known applications.

Because of Battery-Icon, which people are probably installing to monitor their battery, tracker-miner-fs wakes up to update the metadata. That in turn wakes up tracker-store to store the metadata. That in turn wakes up smartsearch which will fetch from Tracker some textual data. All three will consume power periodically because of this .desktop file write trigger. I’m guessing the power consumption is triggering Battery-Icon to update the .desktop file. And circular power consumption was born.

I guess I should file a bug on Battery-Icon and tell its author to update the .desktop file less often. I think he could  for example wait ten minutes before doing that write. Or is the user really interested in accurate battery information each and every second? Looks like Battery-Icon is even writing to the file more frequent every hour. Interesting behavior for a tool monitoring battery to do things in a way that influences power consumption significantly.

Btw, while it’s not fixed: devel-su (enable developer mode, install terminal and password for devel-su is rootme) on your N9 and chmod -x /usr/bin/smartsearch, reboot, then uninstall Battery-Icon and your battery will last longer. I know the guys who were or are on the smartsearch team are going to hate me for that advice. Sorry guys.

About

Last week I wrote about adding a feature to our SPARQL Update’s INSERT OR REPLACE. With that feature it’s not needed to put a DELETE upfront the INSERT to clear a field. This makes our SPARQL-ish INSERT OR REPLACE in some ways more powerful than SQL’s UPDATE. Note, however, that all of INSERT OR REPLACE is non-standard in the SPARQL language. And this new null support certainly isn’t.

Support for null with INSERT OR REPLACE is now available in Tracker‘s master branch. How to use it is illustrated in the functional test. I’ll briefly explain the test.

For single value properties:

This is of course very simple.

INSERT { <subject> nie:title 'new test' }

INSERT OR REPLACE { <subject> nie:title null }

If you now select nie:title for <subject> then of course you’ll get that its nie:title field is unset.

For multi value properties:

Begin situation:

INSERT { <subject> a nie:DataObject, nie:InformationElement }

INSERT { <ds1> a nie:DataSource }

INSERT { <ds2> a nie:DataSource }

INSERT { <ds3> a nie:DataSource }

INSERT { <subject> nie:dataSource <ds1>, <ds2>, <ds3> }

This will be the test query I’ll use for all cases:

SELECT ?ds WHERE { <subject> nie:dataSource ?ds }

For the begin situation that of course gives us <ds1>, <ds2> and <ds3>.

With null upfront, reset of list, rewrite of new list:

INSERT OR REPLACE { <subject> nie:dataSource null, <ds1>, <ds2> }

This will give us <ds1> and <ds2> for the test query. The first null resets the existing list, then <ds1> and <ds2> are added. This is probably the most sensible one to use for multi value properties.

With null in the middle, rewrite of new list:

INSERT OR REPLACE { <subject> nie:dataSource <ds1>, null, <ds2>, <ds3> }

This also gives us <ds2> and <ds3>. First <ds1> is added, but the null that follows clears it again. Then <ds2> and <ds3> get added. So the <ds1> there doesn’t make much sense, indeed.

With null at the end:

INSERT OR REPLACE { <subject> nie:dataSource <ds1>, <ds2>, <ds3>, null }

This one doesn’t make much sense either. The <ds1>, <ds2> and <ds3> get cleared by the null at the end. So the query gives us zero results.

With null as only element:

INSERT OR REPLACE { <subject> nie:dataSource null }

This one makes sense, you can use it to clear a multi value property of a resource. The query gives us zero results.

Multiple nulls:

INSERT OR REPLACE { <subject> nie:dataSource null, <ds1>, null, <ds2>, <ds3> }

Again doesn’t make much sense. First the list is cleared, then <ds1> is added, then it’s again cleared, then <ds2> and <ds3> are added. So the query gives <ds2> and <ds3>.

I believe it was the QtContacts Tracker team who requested this feature. When they have to unset the value of a resource’s property and at the same time set a bunch of other properties, they need to use a DELETE statement upfront an INSERT OR REPLACE. The DELETE increases the amount of queries and introduces a SQL SELECT internally for solving the SPARQL DELETE’s WHERE.

Instead of that they wanted a way to express this in the INSERT OR REPLACE, and that way gain a bit of performance. Today I implemented this.

So let’s say we start with:

INSERT { <subject> a nie:InformationElement ; nie:title 'test' }

And then we replace the nie:title:

INSERT OR REPLACE { <subject> nie:title 'new test' }

Then of course we get ‘new test’ for the nie:title of the resource:

SELECT ?title { <subject> nie:title ?title }

Then let’s say we want to unset the nie:title, we can either use:

DELETE { <subject> nie:title ?title } WHERE { <subject> nie:title ?title }

or we can now also use this (and avoid an extra internal SQL SELECT to solve the SPARQL DELETE’s WHERE):

INSERT OR REPLACE { <subject> nie:title null }

For multi value properties will a null object in INSERT OR REPLACE results in a reset of the entire list of objects. There is still a SQL SELECT happening internally to get the so called old values, but that one is sort of unavoidable and is also used by a normal DELETE. I hope this feature helps the QtContacts Tracker team gain performance for their contact synchronization use cases.

You can find this in a branch, it might take some time before it reaches master as most of the Tracker team is at the Berlin Desktop Summit; it must be reviewed, of course. Since it doesn’t really change any of the existing APIs, as it only adds a feature, we might also bring it to 0.10. Although now that we started with 0.11, I think it probably belongs in 0.11 only. Distributions should probably just upgrade, wait for the new features until they decide to bump the version of their packages, or backport features themselves.